1 to 3 HUB Expansion Unit
The HUB is a unit used to expand the GROVE ports over the M5Stack device. For example, if we wanted sensors with different I2C addresses or output to 3 devices at the same time. (M5Stack device usually can output one device at a time to a limited amount of grove ports)
Note: The HUB is just a hardware expander, if you are looking for a hardware and software (standard protocol) expander like I2C, or Single-bus, please check PaHUB or PbHUB.
If you are connecting two I2C slave devices onto HUB that share the same address, you will have a problem getting I2C data from both. The I2C addresses of the devices must be different, they can be changed manually by changing the resistor values.
Features
- GROVE Expander
- Two Lego-compatible holes
Specifications
| Resources | Parameter |
| Net weight | 5g |
| Gross weight | 17g |
| Product Size | 32x24x12mm |
| Package Size | 67x53x12mm |
Resources
Package Contents
- 1x HUB Unit
- 1x Grove Cable
Original: $3.40
-65%$3.40
$1.19
Description
The HUB is a unit used to expand the GROVE ports over the M5Stack device. For example, if we wanted sensors with different I2C addresses or output to 3 devices at the same time. (M5Stack device usually can output one device at a time to a limited amount of grove ports)
Note: The HUB is just a hardware expander, if you are looking for a hardware and software (standard protocol) expander like I2C, or Single-bus, please check PaHUB or PbHUB.
If you are connecting two I2C slave devices onto HUB that share the same address, you will have a problem getting I2C data from both. The I2C addresses of the devices must be different, they can be changed manually by changing the resistor values.
Features
- GROVE Expander
- Two Lego-compatible holes
Specifications
| Resources | Parameter |
| Net weight | 5g |
| Gross weight | 17g |
| Product Size | 32x24x12mm |
| Package Size | 67x53x12mm |
Resources
Package Contents
- 1x HUB Unit
- 1x Grove Cable
