Arduino MKR IoT Bundle [Discontinued]
The MKR IoT Bundle is a great way to get started with the Internet of Things, including all the components you need to make 5 IoT projects following the step-by-step online tutorials on the Arduino Project Hub online platform.
The MKR IoT Bundle walks you through the basics of using the Arduino MKR1000 for IoT applications. You'll learn through building 5 creative experiments thanks to the step by step online tutorials available on the Arduino Project Hub platform.
Projects
The MKR IoT bundle includes a selection of the most common and useful electronic components to build 5 IoT experiments. The 5 experiments you can make are:
The kit is based around the MKR1000 - a powerful board that combines the functionality of the Zero and the Wi-Fi Shield, enabling makers to add connectivity to their designs with minimal prior networking experience.
Kit Contents
Each bundle includes:
- 1x Arduino MKR1000 board with headers soldered
- 1x micro USB cable
- 1x 400-point breadboard
- 70x solid-core jumper wires
- 1x 9V battery snap
- 1x stranded jumper wire
- 1x stranded jumper wire
- 6x phototransistors
- 3x potentiometers (10 kilohm)
- 10x pushbuttons
- 1x temperature sensor (TMP36)
- 1x tilt sensor
- 1x alphanumeric LCD (16 x 2 characters)
- 1x bright white
- 34x LEDs (4 bright white, 1 RGB, 8 red, 8 green, 8 yellow, 3 blue)
- 1x small DC motor (6/9V)
- 1x small servo motor
- 1x piezo capsule (PKM17EPP-4001-B0)
- 1x H-bridge motor driver (L293D)
- 1x octocoupler (4NE5)
- 2x MOSFET transistors (IRF520)
- 5x capacitors (100uF)
- 5x diodes (1N4007)
- 3x transparent gels (R,G,B)
- 1x male pin strip (40 x 1)
- 20x resistors (220 ohm)
- 5x resistors (560 ohm)
- 5x resistors (1 kilohm)
- 5x resistors (4.7 kilohm)
- 20x resistors (10 kilohm)
- 5x resistors (1 megohm)
- 5x resistors (10 megohm)
Please note: don't connect 9V to the board, as it will cause damage! You can use the 9v battery strip to supply an external component.
Original: $90.00
-65%$90.00
$31.50
Description
The MKR IoT Bundle is a great way to get started with the Internet of Things, including all the components you need to make 5 IoT projects following the step-by-step online tutorials on the Arduino Project Hub online platform.
The MKR IoT Bundle walks you through the basics of using the Arduino MKR1000 for IoT applications. You'll learn through building 5 creative experiments thanks to the step by step online tutorials available on the Arduino Project Hub platform.
Projects
The MKR IoT bundle includes a selection of the most common and useful electronic components to build 5 IoT experiments. The 5 experiments you can make are:
The kit is based around the MKR1000 - a powerful board that combines the functionality of the Zero and the Wi-Fi Shield, enabling makers to add connectivity to their designs with minimal prior networking experience.
Kit Contents
Each bundle includes:
- 1x Arduino MKR1000 board with headers soldered
- 1x micro USB cable
- 1x 400-point breadboard
- 70x solid-core jumper wires
- 1x 9V battery snap
- 1x stranded jumper wire
- 1x stranded jumper wire
- 6x phototransistors
- 3x potentiometers (10 kilohm)
- 10x pushbuttons
- 1x temperature sensor (TMP36)
- 1x tilt sensor
- 1x alphanumeric LCD (16 x 2 characters)
- 1x bright white
- 34x LEDs (4 bright white, 1 RGB, 8 red, 8 green, 8 yellow, 3 blue)
- 1x small DC motor (6/9V)
- 1x small servo motor
- 1x piezo capsule (PKM17EPP-4001-B0)
- 1x H-bridge motor driver (L293D)
- 1x octocoupler (4NE5)
- 2x MOSFET transistors (IRF520)
- 5x capacitors (100uF)
- 5x diodes (1N4007)
- 3x transparent gels (R,G,B)
- 1x male pin strip (40 x 1)
- 20x resistors (220 ohm)
- 5x resistors (560 ohm)
- 5x resistors (1 kilohm)
- 5x resistors (4.7 kilohm)
- 20x resistors (10 kilohm)
- 5x resistors (1 megohm)
- 5x resistors (10 megohm)
Please note: don't connect 9V to the board, as it will cause damage! You can use the 9v battery strip to supply an external component.
